Our today’s post is on How to clean errors in Hp printer?, There are different error codes which you have seen on your screen, and every failure has a different solution and to fix this problem you have to follow some steps through which you can clean errors in Hp printer. To stop the occurrence of such error code Hp recommends the users to use genuine parts like ink cartridge and high-quality paper for pointing. If you do not use the genuine Hp cartridge then to solve this problem, you have to follow the steps provided below, or you can also take help from Hp customer support. The error message might be with numbers and letters, such as 0xc18a0001, displays on the printer control panel or computer.
Step 1: Reset the printer.
It is noticed that in such cases if you reset the printer, you might get out of this problem, I.e., clean errors in Hp printer. For this, you have to follow the points provided below.
Point 1: Make sure that the printer is turned ON before you perform this task.
Point 2: Wait till the printer get silent because it indicates that the printer is ready to use now.
Point 3: When the printer turned ON, now gently disconnect the power cord from the rear of the printer.
Point 4: Now unplug the power cord from the wall output.
Point 5: Wait at least 60 seconds.
Point 6: Now plug the power cord back into the wall output.
Point 7: Now reconnect the power cord to the rear of the printer.
Point 8: If the printer gets turned ON automatically then fine if it does not then manually switch ON the printer.
Point 9: Again wait until the printer become silent for further use.
Step 2: Clean the ink cartridge vents and contacts.
It happens many times that the ink build-up on the ink cartridge contacts and vents might cause an ink cartridge error. So for cleaning the ink cartridge vents and contacts, you must have proper material, so as to clean the vents and contacts. With the help of appropriate material, you can try to solve the problem of clean errors in Hp printer.
- Gather the material before you perform this task.
- A pin to clean any clogged vents.
- A clean, dry cotton swab.
- Distilled or bottled water.
- A clean lint-free cloth.
- Now turn on the printer.
- Smoothly open the ink cartridge access door.
To remove the ink cartridge, press the tab on the front of the ink cartridge to release it and then delete it.
Now quickly place the ink cartridge on the piece of paper with the ink opening point upward.
If there is an orange tab is attached then remove it.
Examine the vent area located on the top of the ink cartridge, next to the Hp logo.
Look at the cartridge carefully see if there is any vent clogged, then use the pin to clean the vents.
Use a fresh, lightly dampened, lint-free cloth to wipe any accumulated ink and debris on the copper-colored
contact on the ink cartridge.
Now carefully reinsert the ink cartridge back to the suitable slot, then push the ink cartridge down and forward until it snaps into its appropriate place.
Make sure that each colored dots on the ink cartridge matches the colored dots on the cartridge.
Now smoothly run the finger along the top of the ink cartridge to make sure that none of them protrude.
- Close the ink cartridge access door.
- Now check the printer control panel display for error message.
Step 3: Service the printer.
If none of the above steps works then take your printer to Hp customer service where they will handle the problem of your Hp printer. Or if you are busy, and you don’t have time to take your printer to the service center then call them Hp support number there they will guide you how to fix this issue if it would be solved on call then they will tell you, if it could not be explained then they will guide you to take help from Hp technical support.
Step 4: Clean the print head.
If you want to clean errors in Hp printer, then you have to clean the print head and fir that you have to follow the steps given below.
Load paper into the paper input tray.
- Now search for the printer model name from the windows.
- Click on settings, and under those settings click print toolbox.
- The print toolbox will open in front of you.
- Now smoothly clean the print head and follow the instructions as mentioned.
- If after trying this step you get success then there is no need for troubleshooting.
So dear friends hope you all got satisfied by our article as we have mentioned many different steps for you so that you can get a better result, and if you are happy and pleased by our material, then please leave your valuable comments below, and if there is any mistake done by us, or we forget something in providing you the proper guidance then please make us inform, and do share our article with your friends and with those who are also in search of how to clean errors in Hp printer. So friends keep supporting and keep sharing.
